Weber 3500 Spécifications télécharger pdf (Page 37)

30 • 3. Advanced Procedures TC3500 Operation Instructions

Rotate the wheel clockwise until the upper bead of the tire is completely installed.

To prevent rim from spinning inside the tire, grasp tire at location shown below and

pull tire along with rim during rotation.

Remove Bead Depressor “Tail” from rim.

Removal of Bead Depressor “Tail”

CAUTION: Never forcefully pull bead depressor “tail” out of tire after

installation to avoid damage to tool and/or rim.

With the upper roller depressing the sidewall of the tire, rotate the wheel

counterclockwise.

Pull the ball knob at the end of the attached blocks as each attached block

approaches the upper bead roller.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 81 82

Pas de commentaire

Weber 3500 Spécifications Page 37